Riso CZ180 Series, User Manual

Page: 64 / 92

Safety Guide - Cleaning 64
Maintenance
Safety Guide - Cleaning
This section describes the precautions to be observed when cleaning the machine. Read this section before cleaning
the machine.
A
WARNING:
• Before cleaning any part of the machine, turn off the power.
• Do not remove any fixed covers.
• Contact your service representative immediately if you suspect any dangerous situation or have questions or prob-
lems with the machine.
• Contact your service representative before moving the machine.
• Do not allow unauthorized persons to make adjustments or repairs.
B
Caution:
• The machine has precision moving parts inside. Do not handle the machine in any other way than described in this guide.
• Be careful of the edge of metal parts, otherwise it may cause an injury.
• Do not make any modifications to the machine or remove any parts.
• Neither RISO nor its dealer is responsible for maintenance service performed by non-RISO-authorized personnel.
Cleaning
Thermal Print Head
Clean the Thermal Print Head each time you replace the Master Roll.
Open the Master Making Unit Cover, and then gently wipe the Thermal Print Head (green film section) in the back of
the unit several times with a soft cloth or tissue.
B
Caution:
• Since the Thermal Print Head may be heated, do not touch it directly with your fingers.
Important!:
• Since the Thermal Print Head is a very delicate part, avoid shocks or scratches with a hard object.
• Since the Thermal Print Head is susceptible to (damage by) static electricity, please be sure to remove the static
electricity charged in the body before cleaning.
Note:
• For more effective cleaning, dampen a soft cloth or tissue with a small amount of alcohol before wiping the Thermal
Print Head.
CZ180_UG.book Page 64 Wednesday, October 31, 2007 6:19 PM