Riso CZ180 Series, User Manual

Page: 37 / 92

Functions for Printing
Adjusting the Print Position [Print Position Adjustment] 37
Adjusting the Print Position
[Print Position Adjustment]
You can adjust the print position in the vertical direction using the Print Position Adjustment keys. Also, you can adjust
it in the horizontal direction by sliding the Feed Tray Paper Guides.
Adjustment range
Vertical direction:
±
10 mm (±
3
/
8
")
Horizontal direction:
±
10 mm (±
3
/
8
") (for B4/Legal paper) to about
±
20 mm (
25
/
32
") (for paper smaller than B4/Legal)
*When using paper larger than B4/Legal, you cannot adjust the horizontal position.
Important!:
• After adjusting the print position, perform proof copies to check the new print position.
) p.36
Adjusting the Vertical Position
Press the / key to adjust the vertical
position.
You can check the current print position in vertical
direction by the Vertical Print Position Indicator.
: Shifts the print position downward.
: Shifts the print position upward.
Adjusting the Horizontal Position
1
Press the key to lower the Paper
Feed Tray.
2
Adjust the horizontal position by slid-
ing the Feed Tray Paper Guides.
1)
Unlock the Feed Tray Paper Guide Lock Levers.
2)
Adjust the horizontal position by sliding the
Feed Tray Paper Guides.
3)
Lock the Feed Tray Paper Guide Lock Levers.
Important!:
• If you have adjusted the horizontal position,
also adjust the Receiving Tray Paper Guides.
Key Adjustment methods
Each press shifts the print
position downward in steps
of about 0.5 mm (
1
/
64
").
Each press shifts the print
position upward in steps of
about 0.5 mm (
1
/
64
").
Returns the print paper to the
original position.
CZ180_UG.book Page 37 Wednesday, October 31, 2007 6:19 PM