Riso CZ180 Series, User Manual

Page: 34 / 92

Functions for Master-Making
Printing Originals Side-by-Side [2-Up Printing] 34
Operational Procedure
1
Place an original.
Place piled originals on the Original Tray. If you
want to print different types and size of originals,
place one original at a time.
The bottom original is scanned first.
2
Press the key to turn on its indica-
tor.
Note:
• To clear the mode, press the key again to
turn off its indicator.
3
Make necessary settings.
Select the Image Processing, Reduction Ratios
and other functions as necessary.
) p.28~ ) p.33
4
Start the master-making process.
‹
Single-original printing
Press the key to start the first scan. Place
the original again within the interval time. The
second scan is automatically started.
Note:
• If the 2-Up printing interval time is not set in
the Custom Setting mode, you cannot use
the single-original printing.
‹
Two-original printing
Place two piled originals on the Original Tray.
Press the key to sequentially execute 2-Up
printing using the two originals. If you want to
make different settings for each original, place
only the first original and then press the
key.
Within the interval time, change the settings,
and then place the second original. Scan of the
second original is automatically started.
5
Enter the number of pages to be
printed, using the Print Quantity
keys.
Check the quality of proof copy. Enter the number
of pages for actual printing.
The specified number is shown on the Print Quan-
tity Display.
6
Press the key.
2-Up printed copies are output.
Note:
• If an original exists on the ADF Unit and if Auto-
Process is ON for two-original printing, the 2-Up
printing is sequentially executed.
CZ180_UG.book Page 34 Wednesday, October 31, 2007 6:19 PM