Riso CZ180 Series, User Manual

Page: 61 / 92

Replacing and Disposing Consumables
Disposal of Used Consumables 61
Disposal of Used Consumables
Dispose the depleted Ink Cartridges, Master Rolls and ejected masters according to the regulations in your local
community. If required, separate the specific components using the following procedures to dispose them properly.
Ink Cartridge
Remove the label (metal included) at the arrow from the outlet surface of the Ink Cartridge, and then dispose them separately.
Because ink may have adhered to the outlet surface of the Ink Cartridge, be careful not to get your clothes dirty.
Master Core
A metallic component has been attached to the bottom of the end section having the mark stamped.
Remove the plastic cap from the Master Core, and peel off the metallic component from the rear surface of the cap.
Ejected Master
Note:
• As it is a chemical compound made of carbon and hydrogen, it is changed into carbon gas and water when com-
busted completely.
Part Name Material
Ink Cartridge Plastic (polypropylene or polyethylene)
Label Plastic (metal included)
Ink Petroleum carbon hybrid, water, and pigment
Part Name Material
Master core Paper
Master Plastic and Japanese paper
Plastic cap Plastic (polypropylene)
Label Plastic (metal included)
Part Name Material
Master material Plastic and Japanese paper
Ink material Petroleum carbon hybrid, water, and pigment
CZ180_UG.book Page 61 Wednesday, October 31, 2007 6:19 PM