18
NiMH CHARGE AUTO
CURRENT 1.0A
The processor detects that the voltage of one cell is too low.
The 4th cell was damaged. Note: The value of a voltage may be zero if disconnection occurs.
Charging of NiCd/NiMH battery
This program is for charging and discharging of NiCd/NiMH batteries associated with R/C
model applications. You can press the button to make the parameter flash and then the
or the button to change the parameter value. Press the button to store the value and
move onto the next parameter.
Only the battery type and current can be adjusted
The screen shows the real-time status. Press the button to end the program. A sound will
be emitted to indicate the end of program.
Voltage balancing and monitoring
The processor monitors the voltage of each cell when the battery packs are in the charge process. If the voltage of
any cell is abnormal, the Sigma EQ Evo will show an error message and terminate the program. If there is battery
damage or disconnection, you can see the error message and press the button to know which cell is damaged.
Summary of Contents for Sigma EQ Evo
Page 1: ......
