background image

23

Warning and service

We warrant this product for a period of one year (12 months) from the date of purchase. This guarantee applies to
materials or operational defects, which are present at the time of purchasing the product. During that period we will
repair or replace, without service charge, any product deemed defective due to those causes.
You will be required to present proof of purchase (invoice or receipt). This warranty does not cover the damage
due to wear, overloading, incorrect handling or use of incorrect accessories.
This warranty does not affect your statutory rights. 

          Sigma EQ EVO

This product complies with the essential requirements of all appropriate EU directives. A copy of the declaration of
conformity can be obtained from Ripmax Ltd, www.ripmax.com 

          

Instruction for disposal of WEEE by users in the European Union

Electrical equipment marked with the crossed wheelie bin symbol must not be discarded in the standard household
waste. Instead, it should be taken to a suitable specialist disposal location or your dealer.

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions 
represent the technical status at the time of printing. Changes in technology and equipment reserved.

Manufactured for: Ripmax Ltd., 241 Green Street, Enfield. EN3 7SJ. United Kingdom

             

          

Summary of Contents for Sigma EQ Evo

























Reviews: