8
WAR N I NG AN D SAF ET Y NOTE S
These warnings and safety notes are particularly important. Please follow the
instructions for maximum safety or the charger and the battery can, at best, be
damaged, or at worst, cause a fire.
Never leave the charger unattended when it is connected to its power supply. If any malfunction is found,
TERMINATE THE PROCESS AT ONCE and refer to this manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration. Never drop it.
The allowable input voltage is 11-18V DC or 100-240V AC but not both at the same time.
This charger and the battery should be put on a heat-resistant, non-flammable and non-conductive surface.
Never place them on a car seat, carpet or similar. Keep all flammable and volatile materials away from
operating area.
Make sure that you know the specifications of the battery to be charged to ensure that it meets the
requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged.
It can also cause a fire or explosion due to over charging. The warranty is not valid for any damage or
subsequent damage arising as a result of a misuse or failure to observe the procedures outlined in this manual.
Always charge in well ventilated areas.
Battery type limits
NOTE: IC = 1 X Capacity in Amps, so 2200mAh is 2.2A.
NiCd/NiMH
Voltage level:1.2V/cell - Allowable fast charge current:1C-2C (depends on the performance of the cells).
Li-ion Voltage level:3.6V/cell
Max.charge voltage:4.1V/cell - Fast charge current: 1C or less.
Summary of Contents for Sigma EQ Evo
Page 1: ......
