12
Program flow chart.
As a default setting, this charger will be set to
typical user values when it is connected to a
power source for the first time.
The screen displays the following information in
sequence and you can change parameters on
each screen.
If you need to alter a parameter value in the
program, press the button to make it flash,
then change the value with the or buttons.
The value will be stored by pressing the button
once.
Pressing the button will jump back to the first
column in this chart.
PROGRAM SELECT
Lithium battery
NiM H /CHARGE AUTO
CURRENT 2.0A
PROGRAM SELECT
PB(Lead Acid)
LiPo FAST CHARGE
2.0A 22.2V(6S)
LiPo CHARGE
2.0A 22.2V(6S)
LiPo BALANCE CHG
2.0A AUTO
Pb CHARGE
2.0A 12.0V (6P)
Lithium battrey
CH K Time 5min
NiM H Sensitivity
D.Peak Default
NiCd Sensitivity
D.Peak Default
02>LiPo CHARGE
2.0A 22.2V(6S)
Watt Limit( W )
CHG 80
03>LiPo BAL ANCE
2.0A 7.4V(7S)
20>LiPo FAST CH
2.0A 11.1V(3S)
20 Memories
Temp. Cut= Off
On 80C
Key Beep ON
Buzzer ON
Capacity Cut= Off
ON 5000mAh
Input Power Low
Cut= Off 11.0V
LS>Pb CHARGE
2.0A 14.4V (6P)
01>NiM H CHARGE
2.0A AUTO
PROGRAM SELECT
Load Memory
Completion Ring
Beep 5
PROGRAM SELECT
User Settings
Safety Timer
On 240min
PROGRAM SELECT
NiM H / NiCd
Summary of Contents for Sigma EQ Evo
Page 1: ......