Velleman VL612LA Manual Download Page 1

VL612LA

 

- 1 - 

VELLEMAN 

VL612LA – BATTERY CHARGER FOR 6V OR 12V LEAD OR NiCd BATTERIES  

 

1. Introduction 

 

To all residents of the European Union 

Important environmental information about this product 

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm 
the environment. 
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised 

company for recycling. 
This device should be returned to your distributor or to a local recycling service. 
Respect the local environmental rules. 

If in doubt, contact your local waste disposal authorities. 

 
Thank you for buying the 

VL612LA

! Please read the manual thoroughly before bringing this device into service. If the 

device was damaged in transit, don't install or use it and contact your dealer. 
 

2. Features 

 

 

LED indicator lights up as soon as the plug is put in. 

 

Rotary switch for current level: 60-120-240-500-900-1300mA 

 

Rotary switch for voltage level: 6V or 12V lead batteries. 

 

3. Operation 

 
1.

 

Select the desired charging current for your lead batteries: from 60 to 1300mA. To charge NiCd batteries, select 
the desired voltage: 6V (for charging up to 5 pcs) or 12V (for charging up to 10 pcs). 

2.

 

Connect the charger to the lead battery. Observe the polarity: connect the red wire to the positive pole and the 
black wire to the negative pole of the battery. 

3.

 

Plug the charger in the mains socket and the LED indicator will light to indicate that the charging is underway. 

4.

 

Unplug the charger and remove the batteries from the charger when not in use. 

 

Charging time (lead batteries): 

6V Lead Battery Capacity (in Ah) 

12V Lead Battery Capacity (in Ah) 

Current 

setting at : 

3Ah 

5Ah 

10Ah 

3Ah 

5Ah 

10Ah 

240mA 

18 h 

--- 

--- 

18 h 

--- 

--- 

500mA 

9 h 

15 h 

30 h 

9 h 

15 h 

30 h 

900mA 

5 h 

8 h 

16 h 

5 h 

8 h 

16 h 

1300mA 

3 1/2 h 

6 h 

11 h 

3 1/2 h 

6 h 

11 h 

 

Charing time (NiCd batteries): 

Standard charging (1/10 of battery capacity) 

Fast charging (3/10 of battery capacity) 

14 to 16 h 

4 to 5 h 

 

CAUTION

 
This charger is intended for use with lead or NiCd batteries only. Any attempt to charge other battery types may 
result in personal injury or damage to the charger. Never operate the charger if the cord or plug is damaged. Consult 
a qualified technician instead. For indoor use only! 

Do not exceed the recommended charging time! 

 

The information in this manual is subject to change without prior notice. 

Summary of Contents for VL612LA






Reviews: