ARBOTOM
®
- Manual
31
Line graph
The line graph transfers the impulse velocities between the sensors into a colored image. You can
choose an adequate color palette in the “Options” menu. The velocities will be presented in the
different palette colors. We recommend the red-yellow-green palette, since it shows the range from
low (red) to high velocities corresponding to a traffic light.
You should note, that in case of a wood defect the signal between two sensors does not allow to
localize the disturbance. It can be somewhere between the sensors. Only the combination of several
pairs of sensors within the network allows a discrimination of the defect.
The graph can be adapted by filtering of values and scaling of the color palette. Both can be set in the
“Options”-menu (right mouse click).
