manualshive.com logo in svg

Rigol DG2000 Series, User Manual

Share
Download
Rigol DG2000 Series User Manual Download Page 158

RIGOL

 

© 2006 RIGOL Technologies, Inc. 

  User’s Guide for DG2000 Series 

6-2 

Appendix B Warranty 

 

RIGOL

 warrants its products’ mainframe and accessories in materials and technics 

within the warranty period. During the period concerned, 

RIGOL

 guarantees the free 

replacement or repair of products which are approved defective. 
 
To get repair service or obtain a copy of the whole warranty statement, please contact 
with your nearest 

RIGOL

 sales and service office. 

 
RIGOL

 do not provide any other warranty items except the one being provided by 

this summary and the warranty statement. The warranty items include but not being 
subjected to the hint guarantee items related to tradable characteristic and any 
particular purpose. 

RIGOL

 will not take any responsibility in cases regarding to 

indirect, particular and ensuing damage.

 

Summary of Contents for DG2000 Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands