manualshive.com logo in svg

Rigol DG2000 Series, User Manual

Share
Download
Rigol DG2000 Series User Manual Download Page 133

RIGOL 

                 

© 2006 RIGOL Technologies, Inc 

                                                                                                                   

 

User’s Guide for DG2000 Series

 

4-3 

Please select type. 

When storing the file and the storage type is “all”, inform the user to choose the 
storage type.   

Insufficient space. Fail to Save.

   

If the file to be stored is too large, and the Non-Volatile Memory does not have 
enough space, the new file can not be stored. This is to inform the user that the 
storage operation failed.   

Fail to read file.

   

If there is no file in the place the user selects, no file can be read and this message is   
to inform the user that the file recall operation failed.   

Please select a valid File. 

If the selected place is empty when recall or delete a file, this message will appear.   

Delete the file? 

Confirm the deletion operation, in case of accidental operation.   

Cover the file? 

If the current place has already been used when the user wants to store the file, this 
message will appear to confirm the operation. If the user continues, the old file will be 
covered. Press “Yes” to continue; Press “Cancel” to reselect the place.

   

Can't Write this File to system. 

This message appears when the operation of burning menu or programs into the 
system from the U Disk fails.   

File is too big. 

If the menu or programs are too large to be burnt into the system from the U Disk, this 
message will appear to inform the user that the operation fails.   

Invalid File, Fail to update.   

When using the U Disk to update the system, if the updating file is void, this message 
will appear to inform the user that the system updating operation can not be 
performed.  

Updating is completed. Restart the instrument.   

If the updating of the System is successful by using the U disk, this message will 
appear. The instrument has to be restarted to update the settings. It also informs the 
user that if a technical problem occurs after the updating, contact the 

RIGOL 

technician for support.   

Invalid code.

 

When the user is updating the system, if the system updating operation password is 

wrong, this message will appear.   

Valid code. System update is permitted. 

When the user is updating the system, if the system updating operation password is 

Summary of Contents for DG2000 Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands