Right Weigh 201-219-11, Installation & Operation Manual

Page: 5 / 32

5
Before scale installation, make sure you install all required strain sensors (see
corresponding Installation Overview for more information on sensor location).
DO NOT mount the scale directly to the chassis or any other main
beam unless it is approved by the vehicle manufacturer. Doing so
may void the warranty with the vehicle manufacturer.
CHOOSE LOCATION
1
Make sure the location chosen is
easily accessible and safe from
potential damage (forklift posts,
tire caps, etc.). Mount the bracket
in the chosen location and install
the gauge box to the bracket
using supplied hardware.
!
This scale is designed to be mounted on the outside of a truck or trailer, a
protective box and mounting bracket are included. The following steps will walk
you through how to correctly mount and install the scale.
SCALE INSTALLATION
& ELECTRICAL CONNECTIONS
Make sure to use BOTH supplied mounting bolts to secure the
bracket to the vehicle. Using only one bolt can result in a cracked
bracket and the scale falling off the vehicle.
!
DUMP AIR FROM SUSPENSION SYSTEM
2