Right Weigh 201-219-11, Installation & Operation Manual

Page: 13 / 32

CALIBRATION
13
1: While the vehicle is empty, obtain axle group weights from a certified
in-ground scale.
2: Park on a level surface. Shift the transmission to neutral and set the parking
brakes. Chock the wheels to prevent unexpected vehicle movement, then
release the parking and service brakes.
3: Make sure the Height Control Valve (HCV) has fully inflated the air bags. If
needed, briefly dump the air from the suspension and allow the HCV to refill
the system.
4: Press the ON/OFF button to turn on the Right Weigh
load scale.
5: Press the blue MENU button to select the proper axle
group.
6: Press and hold the C LOW button until the “C/L” symbol
a ppea rs.
7: Adjust the value using the UP and DOWN arrows so that
it matches your scale ticket for the axle group.
8: To save, press and hold the C LOW button until the “C/L”
symbol disappears.
EMPTY CALIBRATION POINT
LOADED CALIBRATION POINT
Repeat “empty calibration point” steps 1-3 with the vehicle
fully loaded
4: Press the ON/OFF button to turn on the Right Weigh
load scale.
5: Press the blue MENU button to select the proper axle
grou p.
6: Press and hold the C HIGH button until the “C/H” symbol
a ppears.
7: Adjust the value using the UP and DOWN arrows so that
it matches your scale ticket for the axle group.
8: To save, press and hold the C HIGH button until the
“C/H” symbol disappears.
9: Repeat steps 5-8 for all axle groups.
9: Repeat steps 5-8 for all axle groups.