12
The 201-219 spring series load scales must be calibrated both empty and
loaded to work properly. The scale associates the strain on the suspension
system to the weight you enter at the time of calibration. You will need to
calibrate once while the vehicle is empty, and again while the vehicle is
loaded for each axle group being monitored.
STEER AXLE
DRIVE AXLE
GROUP
TRAILER AXLE
GROUP
CALIBRATION
Only enter on-the-ground weight of axle or group being
monitored. DO NOT use gross weight, tare weight, etc.
!
Follow calibration steps on the next page, once these are complete the gauge
will be ready to use!
CHANGING UNITS
With the gauge on, hold the UP ARROW and then
press the MENU button. This will toggle the
settings between pounds and kilograms.
+
STEER AXLE
DRIVE AXLE
GROUP
Summary of Contents for 201-219-11
Page 1: ...ONBOARD LOAD SCALE EXTERIOR DIGITAL AIR SPRING 2 LOW...
Page 28: ...NOTES 28...
Page 29: ...NOTES 29...
