RF096-440/1440-2000 [Revision 1.0.0] 11.11.2022
Fine Coal Burner Inner Surface Inspection Machine
3
1. Safety precautions
·
Do not use the machine in locations close to powerful light sources.
2. CE сompliance
The machine has been developed for use in industry and meets the
requirements of the following Directives:
·
EU directive 2014/30/EU. Electromagnetic compatibility (EMC).
·
EU directive 2011/65/EU, “RoHS“ category 9.
3. Laser safety
The machine makes use of a c.w. 660 nm wavelength semiconductor laser.
Maximum output power is 1 mW. The machine belongs to the 2 laser safety class
according to IEC/EN 60825-1:2014. The following warning label is placed on the
housing:
The following safety measures should be taken while operating the machine:
·
Do not target laser beam to humans.
·
Do not disassemble the laser sensor.
·
Avoid staring into the laser beam.
4. General information
The machine is designed to measure the geometric parameters of the inner
surface of the fine coal burner.
5. Basic technical data
Parameter
Value
Inner diameter measurement range, mm
440...1440
Inner diameter measurement error, mm
±0.5
Scan resolution, points/turnover
2008
Scanning depth range, mm
0...2000
(programmable parameter)
Minimum distance between measured sections, mm
1
(programmable parameter)
Linear displacement error, mm
±0.1
Maximum sampling frequency, Hz
9400
Light source
red semiconductor laser,
660 nm wavelength
Output power, mW
<1
Laser safety class
2 (IEC60825-1)
Interface
WiFi
Power supply, V
Batteries 12V
Weight, kg
77
