RF096-440/1440-2000 [Revision 1.0.0] 11.11.2022
Fine Coal Burner Inner Surface Inspection Machine
19
The service program provides the following options for viewing data:
1. To select a specific measurement, right-click on the corresponding line in the
navigation bar.
2. To view a fragment of a 3D model bounded by two sections, use the mouse to
move the left and right display boundaries to the desired position in the
Longitudinal Section window.
3. To change the viewing angle of the 3D model, move the mouse cursor over
the 3D View window, right-click and move the mouse cursor until the model is
rotated to the desired angle.
4. To view the cross section of an object at a given position, use the mouse
cursor to move the cross section line in the Longitudinal Section window to
the desired position.
5. To view the longitudinal section of an object along a specific plane in the
Cross Section window, rotate the longitudinal section line with the mouse
cursor to the required angle.
6. To automatically view the longitudinal section and the cross section at any
point, move the mouse cursor to the required point in the 3D View window
and double-click the left mouse button.
7. Use the checkboxes at the top of the 3D View window to select:
a.
Points
. The 3D image will be displayed as a point cloud.
b.
Zero model
. The reference surface will be displayed.
c.
Difference
. The difference between the current measurement and the
reference model will be displayed in colour.
Navigation in the 3D View window is done with the mouse:
1. To zoom in, rotate the mouse wheel away from you.
2. To zoom out, rotate the mouse wheel towards you.
3. To rotate the image, move the mouse cursor with the left button pressed.
4. To move the image along the axis of rotation, move the mouse cursor with the
right button pressed.
