16
Fine Coal Burner Inner Surface Inspection Machine
RF096-440/1440-2000 [Revision 1.0.0] 11.11.2022
The main window is divided into the following groups:
1.
Language.
Selecting the user interface language.
2.
Device
. Connecting/disconnecting the service program to/from the system.
3.
Motion
. Manual control of the linear motion system.
4.
Measure
. Setting scan parameters and controlling the measurement process.
5.
Session
. Saving, loading and exporting scan data in various formats.
6.
Measurement list
. Displaying a list of completed measurements and
selecting a single measurement for detailed viewing.
7.
Status.
The current operating mode of the service program.
8.
Cross section
. Displaying a cross section at a given position.
9.
Longitudinal section
. Displaying a longitudinal section of an object by a
given plane.
10.
3D View
. Displaying a 3D model.
Control commands are activated by clicking the corresponding button. Some
buttons are protected from accidental clicking. Before clicking such a button, you need
to remove the protection. As an example, the screenshots below show the
Disconnect
button with the protection not removed (a) and with the protection removed (b).
a)
b)
11.6. Selecting the user interface language
Select the user interface language from the drop-down list in the
Language
group, as shown in the screenshot below. The service program saves the selected
language. The next time you start the service program, the user interface will be
displayed in the selected language.
