RIEXINGER BSM 630, Operating Manual

Page: 57 / 70

9. Maintenance 55
9.5.2 Saw band guide rolls
The saw band guide rolls can be set on the motor and on the operating side.
Fig. Motor side
1) Tilt the axis of the ball bearing by turning the screws 2 and 4 slightly forward.
2) The saw band runs so against the upper bearing and non jumps down
3) If saw band runs to the right or to the left, this can be adjusted with the screws 1 and 2 or 3
and 4.
Info
l
Please note that the adjustments always have an interaction with the other
wheels. Most minimal changes are already successful.
l
Too strong inclination results in increased bearing pressure and thereby
increased wear of bearings and saw band.
l
To protect your machine check the running behavior always initially by
manually moving the saw blade.
BSM 630