RIEXINGER BSM 630, Operating Manual

Page: 40 / 70

38 7. Operation
Pos. Description
1 Saw band cover movable
2 Quick tension lever to fasten saw band cover
3 Saw band
Remove workpiece from the machine
Warning!
The shut-off delay of saw band can cause injury!!
Wait after releasing the push-buttons until saw band stands still. Then loosen the
tension belts and remove workpiece.
1) Stop saw band by releasing push-buttons at the handle.
2) Push saw bow in the rear home position.
3) Release both tension belts and remove them from the workpiece.
4) Remove the workpiece and offcut from the machine with the help of a suitable lifting device
and possibly another person.
7.6 Sawing
Danger!
Running saw band may cause serious severance injury!
l
The machine may only be operated by one person.
l
Before sawing, the operator must ensure that the area behind the work-
piece and the work area are clear.
Attention!
Falling, offcut workpieces may injure the operator!
l
Secure workpiece offcuts that are not clamped in (e.g. with suitable lifting
gear) so that these pieces do not fall from the table after sawing.
l
It is not permissible for the operator or the assisting person to hold or catch
the offcut piece.
BSM 630