RIEXINGER BSM 630, Operating Manual

Page: 38 / 70

36 7. Operation
Attention!
Heavy workpieces may cause lifting injury!
Use lifting gear such as a fork lift, hoisting crane, transport wagon etc. to load or
remove workpieces into or from the machine.
Attention!
Falling, offcut workpieces may injure the operator!
Secure workpiece offcuts that are not clamped in (e.g. with suitable lifting gear)
so that these pieces do not fall from the table after sawing.
Attention!
Sharp pipe edges and saw band may injure the operator!
Always wear protective gloves when loading the machine.
Attention!
Before sawing the workpiece with the machine, it must be securely tensioned
with two tension belts.
Damage to the workpiece and the machine may result if the workpiece is not
clamped in or clamped in insufficiently.
Loading a workpiece into the machine
1) If not yet done, push saw bow in its rear home position
2) Place the workpiece onto the support table of the machine with the help of a suitable lifting
device and possibly another person.
3) Push the workpiece into the desired postition.
4) To do this, use the sliding stop.
BSM 630