RIEXINGER BSM 630, Operating Manual

Page: 27 / 70

6. Setup and activation 25
6. Setup and activation
6.1 Setup location
6.1.1 Floor conditions
Warning!
Persons may be injured and the machine damaged if the floor in the setup
room is not able to bear the machine's load!
Be aware of the following weights when determining the required load-bearing
capacity:
l
BSM 630 during operation
l
Workpieces (pipes)
l
Operating personnel
l
Lifting equipment for pipes
l
Transportation devices for transporting the BSM 630 to the setup location
The floor of the setup room for the BSM 630 must have the following characteristics:
l
Hard, level, without slope
l
Sufficient load-bearing capacity
l
No disruptive vibrations
The surface of the floor must have the following characteristics:
l
Easy to clean
l
Skid resistant
6.1.2 Lighting
The nominal lighting power at the setup location of the BSM 630 must comply with valid work-
place regulations.
6.2 Environmental operating conditions
Operating temperature -10 - + 40 degrees C
Relative humidity 15-55%, non-condensing
Height a. s. l. 1000 m
Max. Dust concentration Legal regulations for workplace threshold values
BSM 630