RIEXINGER BSM 630, Operating Manual

Page: 46 / 70

44 8. Finding an reparing malfuncitons
8.3 Check saw-band motor
Pos. Description
1 Motor saw band
2 Motor carriage
3 Inbus-screw
4 Shaft motor carriage
5 Extraction port sawdust
6 Back saw band cover
Fig. similar
Danger!
Running saw band may cause serious injuries!
l
Before checking the saw-band motor, turn off the machine at the main
switch and secure it against re-activation.
l
The malfunction may only be repaired by one person at a time.
1) If a workpiece is still in the machine, remove it (see Chap. 7.5 on p. 35).
2) Place the saw bow in the rear home position.
3) Turn the machine off at the main switch, and secure it against re-activation.
4) Remove the lower back saw-band cover.
5) Check the tension of the fan belt of the saw-band motor (see image in Chap. 9.4 on p. 51).
6) If necessary, tension the fan belt by loosening both Allen safety screws and turn the shaft of
the motor carriage in the appropriate direction with a suitable socket wrench.
7) Re-tighten the Allen safety screws after preforming the adjustment.
8) Mount the removed saw-band cover at the right location.
9) Turn on the machine with the main switch.
BSM 630