Riester ri-thermo fastPRObe, Instructions For Use Manual

Page: 48 / 156

48
Warning!
Portable RF communications equipment (radios) including
accessories, such as antenna cables and external antennas,
should not be used in closer proximity than 30 cm (12 inches)
to parts and cables of the
ri-
thermo ®
fastPRObe Thermometer
specified by the manufacturer. Failure to comply may result in a
reduction in the device‘s performance features.
Directives and manufacturer‘s declaration - Electromagnetic
emissions
The
ri- thermo
®
fastPRObe Thermometer are intended for
use in the electromagnetic environ¬ment specified below. The
customer or user of the
ri- thermo
®
fastPRObe Thermometer
should ensure that it is used in such an environment.
Guidance and manufacture’s declaration – electromagnetic emission
The ri- thermo
®
fastPRObe Thermometer intended for use in the electroma-
gnetic environment specified below. The customer of the user of the ri-
thermo ®
fastPRObe Thermometer should assure that it is used in such an environment.
Emission test Compliance
Electromagnetic environment
– guidance
RF emissions
CISPR 11
Group 1
The ri-
thermo ®
fastPRObe
Thermometer uses RF energy
only for its internal function.
Therefore, its RF emissions
are very low and are not likely
to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The ri- thermo
®
fastPRObe
Thermometer is intended for
use in all establishments,
including residential areas and
those directly connected to
a public supply network that
also supplies buildings used
for residential purposes.
Harmonic emissions
IEC 61000-3-2
N / A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
N / A