Riester ri-thermo fastPRObe, Instructions For Use Manual

Page: 49 / 156

49
Guidance and manufacture’s declaration – electromagnetic immunity
The ri- thermo
®
fastPRObe Thermometer is intended for use in the electroma-
gnetic environment specified below. The customer or the user of ri-
thermo ®
fastPRObe Thermometer should assure that it is used in such an environment.
Immunity test
IEC 60601
Test level Compliance
level Electromagnetic en-
vironment - guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Con:
± 8 kV
Ais:
± 15 kV
N / A
Con:
± 8 kV
Ais:
± 15 kV
N / A
Floors should be wood,
concrete or ceramic
tile. If floor are covered
with synthetic material,
the relative humidity
should be at least 30%.
The quality of the
supply voltage should
be that of a typical
business or hospital
environment.
Surge
IEC 61000-4-5 N / A N / A The quality of the
supply voltage should
be that of a typical
business or hospital
environment.
Voltage dips, short
interruptions and
voltage variations
on power supply
input lines
IEC 61000-4-11 N / A N / A The quality of the
supply voltage should
be that of a typical
business or hospital
environment.
Power frequen-
cy (50Hz/60Hz)
magnetic field IEC
61000-4-8 30 A/m 30 A/m Mains frequency ma-
gnetic fields should be
at a level charac-
teristic of a typical
location in a typical
commercial hospital
environment.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.