Riello Start Aqua Condens 25/60 BIS, Installer And User Manual

Page: 23 / 76

ENGLISH
23
EN
ENGLISH
INSTALLATION MANUAL
1 - WARNINGS AND SAFETY
After removing the packaging, check the integrity and com-
pleteness of the supply and, otherwise, contact the Riello
Agency that sold the boiler.
The
Start Aqua Condens 25/60 BIS
boiler must be installed
by a qualified company in accordance with the regulations in
force, at the end of the installation process, must issue the
owner with a declaration of conformity certifying that the in-
stallation has been performed according to the best working
practices and in observance of applicable legislation and of the
indications provided by Riello in the present instructions book-
let.
The installer must instruct the user about the operation of the
appliance and about essential safety regulations.
When carrying out routine maintenance, it is always recom-
mended to check the consumption level of the sacrificial an-
ode.
The boiler must be used for the use planned by Riello for which
it was designed. Riello declines all contractual and non-con-
tractual liability for injury to persons or animals or damage to
property deriving from errors made during installation, adjust-
ment and maintenance and from improper use.
In the event of a water leakage, shut off the water supply and
promptly contact the Riello Technical Assistance Centre or oth-
er professionally qualified personnel.
From time to time, check the icon does not light up on the
display; this symbol indicates an incorrect charge pressure.
Otherwise, refer to paragraph "Smart system filling".
Not using the boiler for an extended period of time involves the
execution of at least the following operations:
- turn the main appliance switch and the main system switch
to "off"
- Close the fuel and water taps of the heating system
- Drain the heating and domestic hot water circuits if there is a
risk of freezing.
The boiler maintenance must be carried out at least once a
year.
This booklet and that of the User are an integral part of the ap-
pliance and therefore should be carefully preserved and should
always accompany the boiler even when it is sold to another
owner or user or when transferred to another system. In case
of loss or damage, please contact your local Riello Technical
Assistance Centre for a new copy.
The boiler is constructed so as to protect both the user and
the installer from any accidents. After each intervention on the
product, pay special attention to the electrical connections, es-
pecially the stripped parts of the wires, which must not protrude
from the terminal board in any way.
At the end of its life, the product should be not be disposed of
as solid urban waste, but rather it should be handed over to a
differentiated waste collection centre.
Dispose of all the packaging materials in the suitable contain-
ers at the corresponding collection centres.
When disposing of waste, be careful not to harm human health
or employ procedures or methods which may damage the en-
vironment.
Remember that the use of products requiring fuels, electricity and
water necessitates the respect of certain basic safety rules such as:
it is forbidden for children and unassisted unskilled people to
use the boiler.
It is forbidden to activate electric devices or appliances such as
switches, household appliances and so on if you notice a smell
of fuel or unburnt fuel.
In this case:
- Ventilate the room by opening the doors and windows
- Close the fuel shut-off device
- Promptly call the Riello Technical Assistance Centre or pro-
fessionally qualified personnel.
it is forbidden to touch the boiler while barefoot or if parts of
your body are wet.
It is forbidden to carry out any cleaning operations before dis-
connecting the boiler from the electricity supply; to do this, turn
the main system switch to “OFF”.
It is forbidden to modify safety and adjustment devices without
the boiler manufacturer's permission and relative instructions.
it is forbidden to pull, detach or twist the electric cables that
emerge from the boiler, even if the boiler itself is disconnected
from the mains supply.
it is forbidden to plug or reduce the size of any openings used
for airing the installation area.
it is forbidden to leave flammable containers and substances in
the room where the boiler is installed.
It is forbidden to disperse and leave packaging material within
children's reach as it may be a potential source of hazard.
It is forbidden to obstruct the condensate outlet.
2 - DESCRIPTION
Start Aqua Condens 25/60 BIS
is a wall-hung condensing boiler,
with premix burner and low emission of pollutants for heating and
for the production of DHW use and has a 60 litre steel storage tank.
This is an electronically controlled boilers with automatic ignition, ion-
isation flame check and with proportional control system of the gas
and air flows, both in heating and DHW.
It uses an aluminium alloy boiler body, has a sealed combustion
chamber and, based on the gas discharge accessory used, is clas-
sified in categories B23P, B53P, C13-C13x, C33-C33x, C43-C43x,
C53-C53x, C83-C83xC93C93x. The switching of the heating and
DHW modes is performed via a three-way electric valve which set on
DHW when in the rest position. To guarantee the correct water output
in the exchanger, the boiler is equipped with an automatic by-pass.
The
Start Aqua Condens 25/60 BIS
boiler is also equipped with: