65
COMMISSIONING AND MAINTENANCE
Removing the fan and the burner models Condexa PRO 35 P -
Condexa PRO 50 P
− Remove the locking screws and the panel's front side
− Remove cables (1) and (2) for the fan (3)
− Remove the air pipe from the fan if the thermal module
is type C (C type configuration non standard but obtained
with specific accessory)
− Unscrew the swivel nut (4) and disconnect the gas pipe
− Use a socket wrench to unscrew the four nuts (5) fixing
the fan (3) to the flange (6)
1
3
6
2
4
5
5
− Take the fan (3) and the gasket (7) out
− Unscrew the four nuts (8) fixing the flange (6) to the top
closing (9)
− Remove the gasket (10) and the burner (11).
6
9
8
8
10
11
3
7
− Replace the gaskets (7-10) with the new ones.
Once the maintenance operations are complete, refit the com-
ponents working in the opposite direction of what was de-
scribed.
9
Check that the gas connection is leak proof.
Disassembling of the fan and burners models Condexa PRO 57
P - Condexa PRO 70 P
− Remove the locking screws and the panel's front side
− Remove cables (1) and (2) for the fan (3)
− Remove the air pipe from the fan if the thermal module
is type C (C type configuration non standard but obtained
with specific accessory)
− Unscrew the swivel nut (4) and disconnect the gas pipe
− Unscrew the four screws with a pipe wrench (5) fixing the
fan (3) to the flange (6)
1
4
5
5
3
2
6
− Take the fan (3) and the gasket (7) out
− Unscrew the 4 screws (8) that fix the flange (6) to the
lower flange (9)
− Remove the gasket (10) and the burner (11).
3
8
7
6
11
8
9
10
− Replace the gaskets (7-10) with the new ones.
Once the maintenance operations are complete, refit the com-
ponents working in the opposite direction of what was de-
scribed.
9
Check that the gas connection is leak proof.
