Calibration and operation
47
20093868
GB
Press
for the parameter
060
.
Display: Parameter
060:
blinks, the index
00
: and the value
0
do
not blink.
Press
“i/reset”
for the parameter
rEStorE
.
Display: The parameter
rEStorE
blinks.
Press
“i/reset”
to detect the restore process.
Display: The value
0.
Press
to shift the value by one position to the left.
Display: The value
0
blinks.
Note:
To detect display faults, the value shifts one position to the left.
Press
for the value
1
.
Display: The value
1
blinks.
Press
“i/reset”
to activate the restore process.
The display shows
run.
After about 3 seconds (depending on the duration of the program
sequence), the display shows
bAC End
to indicate the end of the
restore process.
Display:
rSt End.
Fig. 112
S9130
Fig. 113
S9063
/reset
Fig. 114
S9131
Fig. 115
S9063
/reset
Fig. 116
S9133
Fig. 117
S9134
Fig. 118
S9149
Fig. 119
S906
3
/reset
Fig. 120
S9150
<3 s
Fig. 121
S9136
