Appendix - Accessories
73
20093868
GB
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Two components should be ordered:
–
the output power regulator to be installed on the burner;
–
the probe to install on the heat generator.
Label for LPG operation
Apply the adhesive label as shown in Fig. 2, only for LPG opera-
tion.
Kit OCI410 interface for ACS410 software
Interface between burner control and PC. Facilitates viewing, han-
dling and recording setting parameters on site in connection with
the ACS410 software.
B
Appendix - Accessories
Output regulator
Type
Code
RWF55.5
20093954
Probe type
Range (°C) (bar)
Probe Code
Temperature
Water NI 1000 RTD
C5332020
Air NI 1000 RTD
C5332021
Water QAE 2020 RTD
C5332027
Pressure
0 - 15 PSI
C5332040
0 - 60 PSI
C5332041
0 - 150 PSI
C5332042
0 - 200 PSI
C5332043
0 - 300 PSI
C5332044
20094079
Fig. 1
RWF55.5 positioning
Local/remote switch
Optional hole
(available)
20087588
Fig. 2
Adhesive label (supplied)
Burner
Code
RX 700 S/PV
RX 850 S/PV
RX 1000 S/PV
20096826
WARNING
The installer is responsible for the addition of any
safety device not foreseen in this manual.
