background image

4 – English

HEAT GUN SAFETY WARNINGS

  Do not use this heat gun to heat, mold or bend plastic 

sheets, moulding or tubing.

 WARNING:

This heat gun generates extremely high tempera-
tures. Hidden areas such as behind walls, ceilings, 
floors, soffit boards and other panels may contain 
flammable materials that could be ignited by the 
heat gun when working in these locations. The igni-
tion of these materials may not be readily apparent 
and could result in property damage and injury to 
persons. When working in these locations, keep 
the heat gun moving in a back-and-forth motion. 
Lingering or pausing in one spot could ignite the 
panel or the material behind it. 

IMPORTANT SAFETY INSTRUCTIONS

READ THESE INSTRUCTIONS:

 WARNING:

Extreme care should be taken when stripping paint. 
The peelings, residue and vapors of paint may con-
tain lead, which is poisonous. Any pre-1977 paint 
may contain lead and paint applied to homes prior 
to 1950 is likely to contain lead. Once deposited 
on surfaces, hand to mouth contact can result in 
the ingestion of lead. Exposure to even low levels 
of lead can cause irreversible brain and nervous 
system damage; young and unborn children are 
particularly vulnerable. Before beginning any paint 
removal process you should determine whether 
the paint you are removing contains lead. This can 
be done by your local health department or by a 
professional who uses a paint analyzer to check 
the lead content of the paint to be removed. 

LEAD-

BASED PAINT SHOULD ONLY BE REMOVED 
BY A PROFESSIONAL AND SHOULD NOT BE 
REMOVED USING A HEAT GUN.

 WARNING:

Do not direct hot tip or nozzle toward clothing, 
hands, or other body parts. Intense heat from tip 
or nozzle can cause serious burns or cause cloth-
ing to ignite.

Persons removing paint should follow these guidelines:

  Move the work piece outdoors. If this is not possible, 

keep the work area well ventilated. Open the windows 
and put an exhaust fan in one of them. Be sure the fan is 
moving the air from inside to outside.

  Remove or cover any carpets, rugs, furniture, clothing, 

cooking utensils and air ducts.

  Place drop cloths in the work area to catch any paint chips 

or peelings. Wear protective clothing such as extra work 
shirts, overalls and hats.

  Work in one room at a time. Furnishings should be re-

moved or placed in the center of the room and covered. 
Work areas should be sealed off from the rest of the 
dwelling by sealing doorways with drop cloths.

  Children, pregnant or potentially pregnant women and 

nursing mothers should not be present in the work area 
until the work is done and all clean up is complete.

  Wear a dust respirator mask or a dual filter (dust and 

fume) respirator mask which has been approved by the 
Occupational Safety and Health Administration (OSHA), 
the National Institute of Safety and Health (NIOSH), or 
the United States Bureau of Mines. These masks and 
replaceable filters are readily available at major hardware 
stores. Be sure the mask fits. Beards and facial hair may 
keep masks from sealing properly. Change filters often. 

DISPOSABLE PAPER MASKS ARE NOT ADEQUATE.

  Use caution when operating the heat gun. Keep the heat 

gun moving, as excessive heat will generate fumes, which 
can be inhaled by the operator.

  Keep food and drink out of the work area. Wash hands, 

arms and face and rinse mouth before eating or drinking. 
Do not smoke or chew gum or tobacco in the work area.

  Clean up all removed paint and dust by wet mopping 

the floors. Use a wet cloth to clean all walls, sills and any 
other surface where paint or dust is clinging. DO NOT 
SWEEP, DRY DUST OR VACUUM. Use a high phosphate 
detergent or trisodium phosphate (TSP) to wash and mop 
areas.

  At the end of each work session put the paint chips and 

debris in a double plastic bag, close it with tape or twist 
ties and dispose of properly.

  Remove protective clothing and work shoes in the work 

area to avoid carrying dust into the rest of the dwelling. 
Wash work clothes separately. Wipe shoes off with a wet 
rag that is then washed with the work clothes. Wash hair 
and body thoroughly with soap and water.

SAVE THESE INSTRUCTIONS

Summary of Contents for R860435

























Reviews: