Operation
Place Air Mover in desired operating position
(Your Unit May Not Be As Illustrated)
:
Foot Bumpers (4)
Floor & Carpet
90° Ceilings & Ventilation
45° Walls & Ventilation
5
Air Mover Interconnection
RIDGID Air Movers can be interconnected
in series using the convenience outlets.
Applicable Models include AM22870
and AM22880. If utilizing the series
interconnection feature, only use Air
Movers that total less than the
recommended 7.9 Amp maximum
convenience outlet rating. The 8 Amp
on-board circuit breaker will allow up to
two (2) additional RIDGID Air Movers to
run on the first Air Mover at the same time.
NOTE: Air Mover Models AM22870 and
AM22880 are equipped with convenience
outlets with an on-board 8 Amp circuit
breaker. If the convenience outlet
overloads, the circuit breaker will trip. If the
circuit breaker does trip, turn the switch to
the off position and unplug all units then
press the circuit breaker reset button.
Plug the units back into the power source.
The on-board convenience outlets on the
Air Mover will be actively powered when
the Air Mover is plugged in and the circuit
breaker is properly reset.
SP7019-1 3-Speed Air Mover 01 2020.indd 5
1/23/20 1:58 PM
