Ricoh SP 112SF User Manual Download Page 95

Page: 95 / 164

Lists/Reports Related to Fax

The lists and reports related to the fax function are as follow:

• Fax Journal

Prints a fax transmission and reception journal for the last 100 jobs.

• TX Status Report

Prints out the latest Transmission result.

• TX Standby File List

Prints a list of unsent fax jobs remaining in the machine's memory.

• Power Failure Report

Prints a report when the machine's power has been interrupted while sending or receiving a fax, or
images stored in the machine's memory have been lost due to the machine being turned off for a
prolonged period of time.

• Fax Speed Dial List

Prints a list of Speed Dial entries.

• PC FAX Error Report

Prints any errors that occur during transmission of jobs from the computer to the machine.

Lists/Reports Related to Fax

Summary of Contents for SP 112SF





































































































































































Search results

Summary of Contents for SP 112SF

Reviews:

Related manuals for SP 112SF

Brands by name

Popular brands

Ricoh SP 112SF, User Manual

Search results

Summary of Contents for SP 112SF

Reviews:

Related manuals for SP 112SF

Brands by name

Popular brands