Ricoh RDC-5300 Operation Manual Download Page 86

Page: 86 / 134

How To Cancel the Setting

Choose a protected file in step

above and press the ENTER button to erase the

mark.

Copying Files

Files can be copied from the built-in memory to SmartMedia or from SmartMedia to
the built-in memory.

• When a protected file is copied, the new file will not be set as protected.

• Secret files cannot be copied.
• The only files that can be copied are files created with this camera.
• If there is insufficient space at the copy destination, the message

“INSUFFICIENT” will be displayed.
Press the release button to copy the remainder of the file. Press the
MENU button to cancel.

Set the Mode dial to [

] and press the

MENU button.

The playback menu will be displayed.

Note

• Press the MENU button to exit the

operation.

Press the

▼

and

▲

buttons to select

Copy and then press the ENTER button.

The setup menu will be displayed.

• Copying all images

→

P.84

• Copying selected images

→

P.85

■

Copying all images

Press the CARD/IN button and select the

copy source.

Pressing the CARD/IN button will alternate the

setting between CARD

→

IN and IN

→

CARD.

Important

Note

M E N U [ P L A Y ]

    Z O O M   P L A Y B A C K
    A U T O   P L A Y B A C K
    P R O T E C T
    C O P Y
    S E L E C T   F O L D E R
    D P O F
    S E C R E T

B A C K : M E N U S T A R T : E N T E R

M E N U [ C O P Y ]

A L L I M A G E S
S E L E C T E D I M A G E S

B A C K : M E N U S E L . : E N T E R

Summary of Contents for RDC-5300







































































































































Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands

Ricoh RDC-5300, Operation Manual

Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands