Ricoh RDC-5300 Operation Manual Download Page 35

Page: 35 / 134

Getting Started

• Insert the SmartMedia memory card in the correct direction. Do not insert it at

an angle.

• The camera will not turn on when the card door is open.

■

Removing Card

Check that the camera is turned off, and
then open the card door.

“Turning on the Camera” (p.41)

Press the button and pull the
SmartMedia memory card straight out of
the slot.

Pressing the button will cause the SmartMedia
memory card to pop out a little. Then, pull it
straight out of position.

Close the card door.

Important

Note

• Never remove the SmartMedia memory card while data is being recorded

or erased. The data stored on the card could be lost or damaged.

• When the SmartMedia memory card has been removed, place it in the

antistatic case supplied or other protective cover.

Formatting a SmartMedia Memory Card

Before using a new SmartMedia memory card or a SmartMedia memory card that has
been used on another device (such as a PC), you need to format (initialize) it with the
camera.

Important

Note

• Formatting will erase all the files recorded on the SmartMedia memory

card (including protected files).

• Do not format SmartMedia memory cards on a PC.
• The SmartMedia formatted by other devices may not be used.

Note

See

Summary of Contents for RDC-5300







































































































































Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands

Ricoh RDC-5300, Operation Manual

Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands