Ricoh RDC-5300 Operation Manual Download Page 85

Page: 85 / 134

Playback/Erasing

Protecting a File

You can protect valuable files from being erased accidentally.

Important

Note

• Formatting the SmartMedia memory card will erase protected, as well as

unprotected, files.

• The protect mark will not be displayed when the SECRET mode is set.

Set the mode dial to [

] and press the

MENU button.

The play menu will be displayed.

Note

• To cancel the operation, press the

MENU button.

Press the

▼

▲

button to select

[PROTECT] and press the ENTER button.

The setup menu will be displayed.

Note

• To cancel the operation and return to

the play menu, press the MENU
button.

Press the

▼

▲

button to select the

file you wish to protect and press the
ENTER button.

The selected file will be protected and the

mark will be displayed. If you keep the setting,
repeat step

Press the MENU button to cancel the
protect setting.

The screen returns to the play menu. Press the

MENU button again to cancel the operation.

Note

• Protected files cannot be erased until the protection setting is cancelled.

• Files displayed in multi-image playback mode cannot be protected.

Switch to a single-image mode to carry out protection setting. See “Multi
Image Playback” (p.80).

M E N U [ P L A Y ]

    Z O O M   P L A Y B A C K
    A U T O   P L A Y B A C K
    P R O T E C T
    C O P Y
    S E L E C T   F O L D E R
    D P O F
    S E C R E T

B A C K : M E N U S T A R T : E N T E R

P R O T E C T 1 0 / 1 2

B A C K : M E N U S E L . : E N T E R

P R O T E C T 1 0 / 1 2

B A C K : M E N U S E L . : E N T E R

Summary of Contents for RDC-5300







































































































































Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands

Ricoh RDC-5300, Operation Manual

Search results

Summary of Contents for RDC-5300

Reviews:

Related manuals for RDC-5300

Brands by name

Popular brands