Ricoh PRO TF6215, Operating Instructions Manual

Page: 93 / 116

After discharging air bubbles, pull off the tube by pressing the button on the upper surface of the port.
Then completely remove the ink adhered to the port by using the waste cloth or non-woven fabric. Also
make sure to remove the ink adhered to the port of the tool by using a waste cloth or non-woven fabric.
Failure to remove the ink may lead to ink leakage or the inability to discharge air bubbles.
W1-2
W1-1
W2-2
W2-1
C-2
C-1
M-2
M-1
Y 3
Y-2
Y-1
K-3
K-2
K-1
Pr1-3
Cl1-2
Cl1-1
Pr2-3
Cl2-2
Cl2-1
M0DTIC0027
1 2
1. Port for air bubble ejection tool: remove the ink inside the port
2. Port for Discharging Air Bubbles: remove the ink in the inside and outside
If You Cannot Print as Expected
91