Ricoh PRO TF6215, Operating Instructions Manual

Page: 87 / 116

Problem Cause Solution
When performing bidirectional
printing, the printed image is
blurred, or double lines appear
on the image. The forward and backward
printing positions are
misaligned. • If you increase the print
head gap value, use
unidirectional printing.
• Perform [Bi-Dir Offset]. See
"Adjustment for
Misalignment in
Bidirectional Printing",
Administrator Mode
Guide.
The image is smudged during
printing. The print head nozzle faces,
wipers, or cap unit is dirty. Perform the following:
1. Clean the wipers.
See "Cleaning Wipers",
Requests for Daily Care
and Maintenance.
2. Clean the capping station.
See "Cleaning the
Capping Station",
Requests for Daily Care
and Maintenance.
3. Clean the areas around
the print heads.
See "Cleaning Around the
Print Heads", Requests for
Daily Care and
Maintenance.
4. Perform head cleaning.
For details, see page 51
"Cleaning Print Head
Nozzles".
There are blisters on the media
surface. The media surface is dusty. Make the work environment less
dusty.
• Depending on the type or conditions of the media to be used, you may not obtain the print result
you expect. Make sure to use appropriate media. For details, see page 27 "About Media".
If You Cannot Print as Expected
85