English
4
Usage Notice
power cord plug from the wall outlet. Then contact
your service representative and report the problem. Do
not use the machine. Doing so could result in fire or
electric shock.
■
Warning- If metal objects, or water or other fluids fall inside this
machine, you must turn off its power immediately.
After turning off the power, be sure to disconnect the
power cord plug from the wall outlet. Then contact
your service representative and report the problem. Do
not use the machine. Doing so could result in fire or
electric shock.
■
Warning- Never operate this unit on AC power during a
thunderstorm. If you see lightning or hear thunder,
never touch the unit, cables and/or peripherals. An
electric surge caused by the storm, may result in an
electrical shock or damage to the unit.
■
Warning- If the machine topples, or if a cover or other part gets
broken, you must turn off its power immediately.
After turning off the power, be sure to disconnect the
power cord plug from the wall outlet. Then contact
your service representative and report the problem. Do
not use the machine. Doing so could result in fire or
electric shock.
■
Warning- Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
■
Warning- Do not remove any covers or screws that are not
mentioned in this manual. There are high voltage
components inside the machine that may cause electric
shock. Contact your service representative if any of the
machine’s internal components require maintenance,
adjustment, or repair.
■
Warning- Do not disassemble or modify the machine. Doing so
may cause injury or malfunction.
■
Warning- Installing the Projector on a Wall or Ceiling:
a) Do not attempt to clean or replace parts for a
machine that is installed in a high location on a wall or
ceiling. Doing so may cause it to fall down, resulting in
an injury.
b) Contact your sales or service representative to clean
or replace parts for a machine that is installed on a wall
or ceiling.
