English
English
33
Introduction
4. Turn the lens clockwise.
Turn until you hear a click. The lens is now attached to the projector.
5. Insert the lens gap cover throw the lens.
Remove the lens
1. Turn on the projector to display the image.
2. Press the Lens shift button on the remote control for 4 seconds or above, or
press the menu button to select the Expand to act on Lens adjust.,then select
Lens center option. Then then lens will be moved to the original position.
3. Turn off the main power switch and unplug the power cord.
4. Wait until the projector is cooled enough to handle.
5. Remove the lens gap cover throw the lens.
6. When the release button at the bottom of the lens mount on the front panel
of the projector is fully pressed, turn the lens counterclockwise.
● Lens release.
