Configuration
46
P
If you use NetWare, select the frame type for NetWare.
Select one of the items below if necessary.
• Auto Select (Default)
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
❒
Usually, use the default setting (“Auto Select”). When you first select “Auto
Select”, the frame type detected by the printer is adopted. If your network
can use more than two frame types, the printer may fail to select the correct
frame type if “Auto Select” is selected. If this happens, select the appropri-
ate frame type.
Q
Press the
{U}
or
{T}
key to display [
Frame Type (NW)
], and then press the
{
# Enter
}
key.
The current setting appears on the display.
R
Press the
{U}
or
{T}
key to display the frame type you want to use, and
then press the
{
# Enter
}
key.
About two seconds after the settings are made, the screen returns to the net-
work setup menu.
S
Press the
{
Online
}
key.
The initial screen appears.
T
Print a configuration page to confirm the settings made.
For details about printing the configuration page, see
p.36 “Test Printing”
.
Network Setup:
Frame Type (NW)
Frame Type (NW):
*Auto Select
Ready