Connecting the Machine
41
D
Fit the other tie wrap snugly around the end of the ferrite core to prevent
the core moving along the cable
❒
Fasten the tie wrap tightly.
❒
Cut off excess tie wrap using scissors.
E
Fit the other tie wrap snugly around the end of the ferrite core to prevent
the core moving along the cable.
F
Plug the cable into the connector on the machine’s interface and the
other end of the cable into the connector on the computer’s interface.
The machine and the computer are now connected. Next, install the printer
driver. For details, see “Preparation for Printing”, Software Guide.
