Ricoh P7575 Operating Instructions Manual Download Page 32

Page: 32 / 451

Setting Up

Turning the Power On

❖

Power Switch

• Power Switch (front left)

Setting this switch to

Stand by unlit the power lamp on the control panel.

The machine is then in stand by mode.

❒

This machine automatically enters Energy Saver mode if you do not use it for
a certain period.

Open the switch cover and make sure the power is set to

Stand by.

❒

Make sure the power cable is plugged securely into the wall outlet.

❒

Turn the power Stand by when plugging and unplugging the power plug.

Open the switch cover and turn the power to On.

The power indicator on the control panel lights up.

•

Plug and unplug the power cable with dry hands, or an electric shock
could occur.

Summary of Contents for P7575




































































































































































































































































































































































































































































Search results

Summary of Contents for P7575

Reviews:

Related manuals for P7575

Brands by name

Popular brands

Ricoh P7575, Operating Instructions Manual

Search results

Summary of Contents for P7575

Reviews:

Related manuals for P7575

Brands by name

Popular brands