Preparing for Printing
48
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [
OK
].
The default interface language is English.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [
PostScript 3 Printer Driver
].
Add Printer Wizard starts.
E
Click [
Next
].
F
Click [
Add Port:
].
G
Select [
LPR Port
], and then click [
OK
].
H
Enter the printer's IP address in the [
Name or address of server providing lpd
box
] box.
I
Enter “lp” in the [
Name of printer or print queue on that server
] box, and then
click [
OK
].
J
Check that the name of the printer whose driver you want to install is se-
lected, and then click [
Next >
].
K
Change the printer name if you want, and then click [
Next >
].
Select the
[
Yes
]
check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [
Finish
].
The printer driver installation starts.
M
Restart the computer to complete installation.
❒
A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
