manualshive.com logo in svg

Ricoh MP 6503, User Manual

Share
Download
Ricoh MP 6503 User Manual Download Page 125

• You can load paper even if tray 1 is in use. It is okay to pull out the left half of the tray while tray 1

is in use.

Loading Paper into the A3/11 × 17 Tray Unit

•

(mainly Europe and Asia)

A3/11 × 17 tray unit can hold A3  paper only. If you want to print on A4

, B4 JIS , 11 × 17

, 8

1

/

2

 × 14 , or 8

1

/

2

 × 11

, contact your service representative.

•

(mainly North America)

A3/11 × 17 tray unit can hold 11 × 17  paper only. If you want to print on A3 , A4

, B4 JIS

, 8

1

/

2

 × 14 , or 8

1

/

2

 × 11

, contact your service representative.

• Check the paper edges are aligned at the right side.

1.

Carefully pull out the paper tray until it stops.

DQA146

2.

Square the paper and load it print side down.

Do not stack paper over the limit mark.

DQA147

3.

Carefully push the paper tray fully in.

Loading Paper

123

Summary of Contents for MP 6503





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands