Ricoh MP 2001 Page 13 Operating Instructions Manual Download

Page: 13 / 156

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• If the power cord is damaged and its inner wires are exposed or broken, contact your service

representative for a replacement. Use of damaged power cords could result in fire or electric
shock.

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the

following:

• There are burn marks on the plug.
• The prongs on the plug are deformed.

• If any of the above conditions exist, do not use the plug and consult your dealer or service

representative. Use of the plug could result in fire or electric shock.

Summary of Contents for MP 2001





























































































































































Search results

Summary of Contents for MP 2001

Reviews:

Related manuals for MP 2001

Brands by name

Popular brands

Ricoh MP 2001, Operating Instructions Manual

Search results

Summary of Contents for MP 2001

Reviews:

Related manuals for MP 2001

Brands by name

Popular brands