Ricoh I202 Page 157 Operating Instructions Manual Download

Page: 157 / 445

Cannot Make Desired Copies

Cannot Make Desired Copies

Combine

Problem

Cause

Action

Misfeeds occur frequently.

Copy paper size setting is not
correct.

Set the proper paper size. See
p.48 “Changing the Paper
Size” or p.27 “Copying from
the Bypass Tray”.

You cannot combine several
functions.

Selected functions cannot be
used together.

Refer to the combination
chart. See p.37 “Combination
Chart”.

Problem

Cause

Action

Parts of the image are not cop-
ied.

The original size and the copy
paper size do not match.

Set the original size and the
copy paper size correctly. See
p.20 “Placing Standard Size
Originals”

Your originals are not identi-
cal in size and direction.

Use originals that are identical
in size and direction.

Order of copies is not correct.

You placed originals in an in-
correct order.

When loading originals in the
document feeder (ADF), the
last page should be on the bot-
tom.

If you place an original on the
exposure glass, start with the
first page to be copied.

StellaC-EN-CopyF_V4_FM.book Page 41 Wednesday, July 4, 2001 11:23 AM

Summary of Contents for I202






























































































































































































































































































































































































































































Search results

Summary of Contents for I202

Reviews:

Related manuals for I202

Brands by name

Popular brands

Ricoh I202, Operating Instructions Manual

Search results

Summary of Contents for I202

Reviews:

Related manuals for I202

Brands by name

Popular brands