Ricoh I202 Page 393 Operating Instructions Manual Download | Manualshive

Page: 393 / 445

background image

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual.

Please keep this manual in a handy place near the machine.

Please read the Safety Information in the “Copy Reference” manual before using this machine. It con-
tains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

“PS2” stands for PostScript level2 Compatible in this manual.

Important

Parts of this manual are subject to change without prior notice. In no event will the company be liable
for direct, indirect, special, incidental, or consequential damages as a result of handling or operating
the machine.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries.

Ethernet is a registered trademark of Xerox Corporation.

Adobe, PostScript, Acrobat and PageMaker are registered trademarks of Adobe System Incorporated.

PCL is a registered trademark of Hewlett-Packard Company.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights in those marks.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.

Notes:

Some illustrations might be slightly different from your machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

«
...
391
392
393
394
395
...
»

Summary of Contents for I202






























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for I202

Brand: Ier Pages: 8

Brand: Oki Pages: 94

Brand: Partner Pages: 15

Brand: Evolis Pages: 45

DocuCentre-VI C2264

Brand: Fuji Xerox Pages: 129

Brand: Jolimark Pages: 64

Executive Series 3037

Brand: Oki Pages: 546

DocumentCentre C400 Series

Brand: Xerox Pages: 97

Brand: DataCard Pages: 106

M-Class Mark II M-4206

Brand: Datamax Pages: 76

Brand: imagistics Pages: 230

3150 - Phaser B/W Laser Printer

Brand: Xerox Pages: 2

S510 - ScanSnap - Document Scanner

Brand: Fujitsu Pages: 295

Brand: Canon Pages: 229

image runner 2520

Brand: Canon Pages: 630

imageCLASS D530

Brand: Canon Pages: 76

IMAGE RUNNER 110

Brand: Canon Pages: 12

imageCLASS D600 Series

Brand: Canon Pages: 113

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands