manualshive.com logo in svg

Ricoh I202, Operating Instructions Manual, Page: 160 / 445

Share
Download
Ricoh I202 Operating Instructions Manual Download Page 160

Troubleshooting

44

3

h

h

h

h

 Changing the Toner Cartridge

When 

h

 is displayed, it is time to supply toner.

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

Important

❒

If you use toner other than that recommended, a fault might occur.

❒

When adding toner, do not turn off the power switch. If you do, your settings
are cleared.

❒

Always add toner after the machine instructs you to add toner.

Note

❒

You can still make about 50 copies after the 

h

 symbol is lit and “Toner is Al-

most Empty” is displayed, but replace the toner early to prevent poor copy
quality.

Reference

Regarding toner storage, see p.15 “Toner Storage”.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers 
in accordance with local regulations for plastics.

•

Keep toner (used or unused) and toner containers out of reach of children.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.

• Open the front cover of the machine.

• Lift the green holder.

• Push the green lever, and then gently pull 

out the holder.

StellaC-EN-CopyF_V4_FM.book  Page 44  Wednesday, July 4, 2001  11:23 AM

Summary of Contents for I202






























































































































































































































































































































































































































































Reviews:

No comments