manualshive.com logo in svg

Ricoh I202, Operating Instructions Manual

Share
Download
Ricoh I202 Operating Instructions Manual Download Page 331

27

4. Reception Features

General

Immediate Reception

Each page of a received fax message is
printed as soon as it is received. This
method is used for standard fax mes-
sages.

❖

❖

❖

❖

Display during reception

The sender's name or fax number
appears on the upper line.

❖

❖

❖

❖

Reception resolution 

This machine supports 

Standard

and 

Detail

 resolutions for recep-

tion. A fax message may be printed
in a resolution different from the
one specified by the sender.

Note

❒

Reception will not take place if
there is not enough free memo-
ry left. If free memory reaches
0% during Immediate Recep-
tion, any further reception be-
c o m e s   i m p o s s i b l e   a n d   t h e
current communication is ter-
minated. 

Memory Reception

The machine waits until all pages of
the message have been received into
memory before printing the message.

This method is used with Substitute
Reception. See p.28 “Printing Docu-
ments that have been Received into
Memory (Substitute Reception)” .

Important

❒

All the messages stored in memory
are deleted if the power is switched
off for more than 12 hours.

❒

The machine may not be able to re-
ceive large numbers of messages
or messages with a high data con-
tent. In such cases, we recommend
you switch the above functions off.

Limitation

❒

The machine may not be able to re-
ceive fax messages when the free
memory space is low.

Note

❒

If the memory free space reaches
0% during Memory Reception, the
machine can no longer receive the
current fax message and stops
communicating. 

StellaCEN-advanced_V4_FM.book  Page 27  Tuesday, July 17, 2001  1:01 PM

Summary of Contents for I202






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands