manualshive.com logo in svg

Ricoh I202, Operating Instructions Manual, Page: 428 / 445

Share
Download
Ricoh I202 Operating Instructions Manual Download Page 428

Printer Features Parameters

31

4

Font Number

You can set the ID of the default font you want to use.

• 0 to 54 (for Internal)

• 1 to 50 (for Download source)

Note

❒

Default: Internal

❒

Default: 0

Point Size

You can set the point size you want to use for the default font.
4 to 999.75 by 0.25

Note

❒

Default: 12.00

❒

This setting is effective only for a variable-space font.

Font Pitch

You can set the number of characters per inch you want to use for 
the default font.

0.44 to 99.99 by 0.01

Note

❒

Default: 10.00

❒

This setting is effective only for a fixed-space font.

Symbol Set

You can specify the set of print characters for the default font. The 
available options are as follows.

Roman-8, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-
852, PC8-TK, Win L1, Win L2, Win L5, Desktop, VN Intl, VN US, 
MS Publ, Math-8, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, 
ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0

Note

❒

Default: Roman-8

Menu

Description

Summary of Contents for I202






























































































































































































































































































































































































































































Reviews:

No comments